Kerick Valve PF08-025 Polyethylene Sphere Float Ball, 8″ Diameter, 8″ Length, 1/4″ Female Thread

#ad
#ad
Kerick Valve PF08-025 #ad - The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. The company, founded in 1994, is headquartered in Jacksonville, FL. It is intended for use with 1" inlet float valves and 1/4"-20 threaded rods sold separately. Polyethylene for chemical resistance.

The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. This kerick pf08-025 oval float ball is 8" in diameter. For use with 1" inlet float valves and 1/4"-20 threaded rods sold separately. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, cooling towers, such as fountains, livestock water tanks, and chemical manufacturing plants.

Kerick Valve PF08-025 Polyethylene Sphere Float Ball, 8" Diameter, 8" Length, 1/4" Female Thread #ad - Kerick valve manufactures fluid level control valves for industrial applications. As part of a float valve installation, it is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank.

When the angle of the valve lever changes sufficiently, the valve opens or closes. It is made of polyethylene for resistance to corrosion and to deterioration from sunlight, is molded in one piece to resist leakage, and has 1/4"-20 female threads.

More information about Kerick Valve PF08-025 #ad

Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length

#ad
#ad
Kerick Valve SR10 #ad - 1/4"-20 male threads at each end for mounting, 10" long. Stainless steel rod, 1/4-20 in connection, Weight Less than 1 lb, Length 10 In. Dia. 18-8 stainless steel for corrosion resistance. 1/4 in. Material of construction stainless steel, g2011292, g3142237, female threaded, for use with g2666097, G2986794 ' For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

More information about Kerick Valve SR10 #ad


Similar products



Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1" NPT Male Inlet x 1" NPT Male Outlet, 68.5 gpm at 85 psi Pressure

#ad
#ad
Control Devices #ad - Free discharge flow capacity: 43. 5 gpm at 35 psi, 61 gpm at 65 psi and 68. 5 gpm at 85 psi. Applicable for precision liquid level control, car wash, and reverse osmosis water, industrial tanks, de-ionized, increased resistance to corrosion and chemicals, food service and sanitary applications, livestock waterier, ultra pure, evaporative coolers, kitchen steam tables, aggressive water applications, boiler feed water systems, cooling towers, high pressure wash, swimming pools, many other agricultural and industrial uses.

High capacity, heavy duty. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Buna-n-Disc standard. Not compliant with cA Prop 65 or Safe Water Drinking Act. 18-8 stainless steel for corrosion resistance. Adjusting arm tapped 1/4"-20 thread. Red brass body. 1/4"-20 male threads at each end for mounting, 10" long.

Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1" NPT Male Inlet x 1" NPT Male Outlet, 68.5 gpm at 85 psi Pressure #ad - Nsf listed. Sst valve. Buna-N-disc standard.

More information about Control Devices #ad


Similar products



Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4" NPT Male Inlet x 3/4" NPT Male Outlet, 39.9 gpm at 85 psi Pressure

#ad
#ad
Control Devices #ad - Applicable for precision liquid level control, aggressive water applications, high pressure wash, car wash, ultra pure, swimming pools, cooling towers, food service and sanitary applications, de-ionized, evaporative coolers, industrial tanks, livestock waterier, and reverse osmosis water, increased resistance to corrosion and chemicals, kitchen steam tables, boiler feed water systems, many other agricultural and industrial uses.

Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4" NPT Male Inlet x 3/4" NPT Male Outlet, 39.9 gpm at 85 psi Pressure #ad - Adjusting arm tapped 1/4"-20 thread. Red brass body. 1/4"-20 male threads at each end for mounting, 10" long. Not compliant with cA Prop 65 or Safe Water Drinking Act. High capacity, heavy duty. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Adjusting arm tapped 1/4"-20 thread.

. Buna-N-disc standard. Buna-N-disc standard. 18-8 stainless steel for corrosion resistance. Buna-n-Disc standard. Not compliant with cA Prop 65 or Safe Water Drinking Act. Sst valve.

More information about Control Devices #ad


Similar products



Robert Manufacturing R450-12 Brass Stem, 1/4"-20 SAE Male, 12" Length

#ad
#ad
Control Devices R450-12 #ad - 18-8 stainless steel for corrosion resistance. Male thread on both ends. 12" length. Brass metal rod. Red brass body. Not compliant with cA Prop 65 or Safe Water Drinking Act. Buna-N-disc standard. Brass metal rod. Adjusting arm tapped 1/4"-20 thread. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

Buna-N-disc standard. Not compliant with cA Prop 65 or Safe Water Drinking Act. Male thread on both ends. Not compliant with cA Prop 65 or Safe Water Drinking Act. Adjusting arm tapped 1/4"-20 thread. 1/4"-20 sae male. Red brass body. 1/4"-20 male threads at each end for mounting, 10" long. High capacity, heavy duty.

Robert Manufacturing R450-12 Brass Stem, 1/4"-20 SAE Male, 12" Length #ad - High capacity, heavy duty.

More information about Control Devices R450-12 #ad


Similar products



Mueller Industries 109-814 Float Valves, 3/4-Inch

#ad
#ad
Mueller Industries 109-814 #ad - High tensile manganese bronze long and short arms. 1/4"-20 male threads at each end for mounting, 10" long. Male thread on both ends. Free discharge flow capacity. Machined flange for support against tank wall. Bronze finish. No. R400-1/2: 12 gpm at 35 psi; 22gpm at 85 PSI. Buna-N-disc standard. 18-8 stainless steel for corrosion resistance.

Carded. No. R400-3/4: 21 gpm at 35 psi; 39. 9 gpm at 85 pSI. High capacity, heavy duty. High capacity, heavy duty. Buna-N-disc standard. All bronze bodies. 3/4-inch. Not compliant with cA Prop 65 or Safe Water Drinking Act. Machined flange for support against tank wall. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

Mueller Industries 109-814 Float Valves, 3/4-Inch #ad - Red brass body. Dual inlet thread for connecting pipe and locknut. Red brass body.

More information about Mueller Industries 109-814 #ad


Similar products



Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1" NPT Male

#ad
#ad
Kerick Valve PT100SS #ad - Male thread on both ends. Carded. 3/4-inch. Pvc for corrosion resistance. Buna-N-disc standard. 1/4"-20 male threads at each end for mounting, 10" long. Orifice, compliance nsf/ansi 61, standard 169, valve material pvc ' For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

18-8 stainless steel for corrosion resistance. Buna-N-disc standard. Pressure 100 psi, Features 070 in. High tensile serrated arms. Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1" NPT Male #ad - 1" npt male threaded inlet and outlet. High capacity, heavy duty. Dual inlet thread for connecting pipe and locknut. Red brass body. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. Tank mount with extended threads on inlet side of valve for mounting through tank wall.

Adjusting arm tapped 1/4"-20 thread.

More information about Kerick Valve PT100SS #ad


Similar products



Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length

#ad
#ad
Kerick Valve SR12 #ad - 1" npt male threaded inlet and outlet. High capacity, heavy duty. Tank mount with extended threads on inlet side of valve for mounting through tank wall. The company, founded in 1994, is headquartered in Jacksonville, FL. Male thread on both ends. 18-8 stainless steel for corrosion resistance. Red brass body. Not compliant with cA Prop 65 or Safe Water Drinking Act.

. Buna-N-disc standard. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. Pvc for corrosion resistance. As part of a float valve installation, it is suitable for use in a variety of applications, livestock water tanks, such as fountains, and chemical manufacturing plants.

Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length #ad - Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. 3/4-inch. When the angle of the valve lever changes sufficiently, the valve opens or closes. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied.

The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. 1/4"-20 male threads at each end for mounting, 12" long.

More information about Kerick Valve SR12 #ad


Similar products



Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length

#ad
#ad
Kerick Valve SR06 #ad - Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. 18-8 stainless steel for corrosion resistance. 1/4"-20 male threads at each end for mounting, 6" long. Carded. 3/4-inch. It is intended for use with 3/8" and 1/2" inlet float valves and 4 x 5" or 2 x 2 x 4" float balls sold separately.

Brass metal rod. 18-8 stainless steel for corrosion resistance. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. This kerick sr06 stainless steel rod is 1/4" in diameter and 6" long.

Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length #ad - The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. Pvc for corrosion resistance. For use with 1" inlet float valves and 6" or 8" float balls sold separately. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

Dual inlet thread for connecting pipe and locknut. 1" npt male threaded inlet and outlet.

More information about Kerick Valve SR06 #ad


Similar products



Mueller Industries 109-813 Float Valves, 1/2-Inch

#ad
#ad
Mueller Industries 109-813 #ad - Buna-N-disc standard. Free discharge flow capacity. Serrated arms for quick and easy adjustment of water level all sizes. High capacity, heavy duty. High tensile serrated arms. Brass metal rod. 1" npt male threaded inlet and outlet. 1/4"-20 male threads at each end for mounting, 6" long. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Mueller Industries 109-813 Float Valves, 1/2-Inch #ad - Dual ranges for estimated rate of flow up to 56 gpm at 60 psi low flow and 69 gpm at 60 psi high flow. No. R400-3/4: 21 gpm at 35 psi; 39. 9 gpm at 85 pSI. Bronze finish. Red brass body. All bronze bodies. 1/2-inch. 18-8 stainless steel for corrosion resistance. Male thread on both ends. Not compliant with cA Prop 65 or Safe Water Drinking Act.

For use with 1" inlet float valves and 6" or 8" float balls sold separately. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut.

More information about Mueller Industries 109-813 #ad


Similar products



Kerick Valve PS100SS PVC Float Valve, Standard Mount, 60 gpm at 60 psi, 1" NPT Male

#ad
#ad
Kerick Valve PS100SS #ad - Adjusting arm tapped 1/4"-20 thread. Adjusting arm tapped 1/4"-20 thread. This float valve is suitable for use in a variety of applications, livestock water tanks, such as fountains, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank.

Red brass body. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. The company, founded in 1994, is headquartered in Jacksonville, FL.1/2-inch. High capacity, heavy duty. Carded. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately.

Kerick Valve PS100SS PVC Float Valve, Standard Mount, 60 gpm at 60 psi, 1" NPT Male #ad - Machined flange for support against tank wall. 3/4-inch. For use with 12" x 1/4" stainless steel rod and 6" or 8" float ball sold separately. Buna-N-disc standard. Bronze finish. The valve uses a 12" x 1/4" stainless steel rod and a 6" or 8" float ball sold separately. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms locknut included with male inlet valves.

More information about Kerick Valve PS100SS #ad


Similar products

Scroll to top