Mitutoyo 500-193 Absolute Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, 0-12″ Range, -0.0015″ Accuracy, 0.0005″ Resolution

#ad
#ad
Mitutoyo 500-193 #ad - Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. Function control buttons on the face, On/Off, for ease of use: Origin, and Zero/ABS Absolute Scale. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement.

Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. It uses the metric measuring system. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. An alarm alerts the user to low voltage and scale contamination and counting value composition errors.

Mitutoyo 500-193 Absolute Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, 0-12" Range, -0.0015" Accuracy, 0.0005" Resolution #ad - The mitutoyo absolute 500 series caliper is a digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.

Lcd resolution is 001mm. Four-way measurement capability for multiple applications: outside diameter OD, inside diameter ID, depth, and step. Digital, single-value readout LCD display in metric units for readability.

More information about Mitutoyo 500-193 #ad

Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

#ad
#ad
Mitutoyo 500-196-30 #ad - The mitutoyo 500-196-30 digital caliper has a 0 to 6" 0 to 150mm measuring range with 00005" 001mm increments for precision and an advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale.

Except 500-500-10, 500-501-10, 500-502-10 Includes protective case and SR44 silver oxide battery. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object.

Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD #ad - One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. An additional depth probe slides along the beam to take depth measurements. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read.

. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. The company, founded in tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

More information about Mitutoyo 500-196-30 #ad


Similar products



Mitutoyo 500-197-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

#ad
#ad
Mitutoyo 500-197-30 #ad - An additional depth probe slides along the beam to take depth measurements. The company, founded in tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL. What's in the box?electronic caliperSR44 batteryProtective case Measures 0 to 6" 0 to 150mm in 00005" 001mm increments for precision use.

Digital readout LCD shows inch or metric units for versatility when measuring. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Measures inside, outside, depth, and step values for versatility. Includes protective case and SR44 silver oxide battery.

Mitutoyo 500-197-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD #ad - Digital readout LCD shows inch or metric units for versatility when measuring. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Measures inside, outside, depth, and step values for versatility. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements.

Its digital readout lcd shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. Except 500-500-10, 500-501-10, 500-502-10 Includes protective case and SR44 silver oxide battery.

More information about Mitutoyo 500-197-30 #ad


Similar products



Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Thimble, 0-1" 0-25mm Range, 0.00005" 0.001mm Resolution, +/-0.00005" Accuracy, Meets IP65 Specifications

#ad
#ad
Mitutoyo 293-340-30 #ad - Ratchet stop. With thumb roller. Measures inside, outside, depth, and step values for versatility. Supplied in fitted plastic case. Lot of 1 measures 0 to 6" 0 to 150mm in 00005" 001mm increments for precision use. Auto On/Off. Carbide measuring faces. Lcd screen displays in inches and metric units. Measures 0 to 8" 0 to 200mm in 0

0005" 001mm increments for precision use. Digital readout LCD shows inch or metric units for versatility when measuring. Digital readout LCD shows inch or metric units for versatility when measuring. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Measures inside, outside, depth, and step values for versatility.

Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Thimble, 0-1" 0-25mm Range, 0.00005" 0.001mm Resolution, +/-0.00005" Accuracy, Meets IP65 Specifications #ad - Includes protective case and SR44 silver oxide battery. Ingress protection certified IP65 for protection against dust and water. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Except 500-500-10, 500-501-10, 500-502-10 Includes protective case and SR44 silver oxide battery.

More information about Mitutoyo 293-340-30 #ad


Similar products



Mitutoyo 500-506-10 Absolute Digimatic Caliper, Inch/Metric, Stainless Steel Jaws, 0-24" 0-600mm Range, 0.0005" 0.01mm Resolution, +/-0.002" Accuracy

#ad
#ad
Mitutoyo 500-506-10 #ad - Digital readout LCD shows inch or metric units for versatility when measuring. 780mm body length for measuring large items. Lcd screen displays in inches and metric units. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. Except 500-500-10, 500-501-10, 500-502-10

Mitutoyo 500-506-10 Absolute Digimatic Caliper, Inch/Metric, Stainless Steel Jaws, 0-24" 0-600mm Range, 0.0005" 0.01mm Resolution, +/-0.002" Accuracy #ad - Includes protective case and SR44 silver oxide battery. Caliper measures 0 to 24. 0" 0 to 600mm with 00005" 001mm resolution and + or - 0002" accuracy, for measuring inside and outside diameters, depth, and step of items in harsh workshop conditions. Lcd screen displays in inches and metric units. Absolute electrostatic capacitance-type linear encoder for accurate measurements.

An additional depth probe slides along the beam to take depth measurements. This caliper has a measurement range of 0 to 24" 0 to 600mm, resolution of 00005" 001mm, and an accuracy of + or - 0002".

More information about Mitutoyo 500-506-10 #ad


Similar products



Mitutoyo 505-746 Dial Caliper, 0.1" per Rev, 0-12" Range, 0.002" Accuracy

#ad
#ad
Mitutoyo 505-746 #ad - Ingress protection certified IP65 for protection against dust and water. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Titanium nitride tin coating is applied to the sliding surface to increase wear resistance. Digital readout LCD shows inch or metric units for versatility when measuring.

Mitutoyo 505-746 Dial Caliper, 0.1" per Rev, 0-12" Range, 0.002" Accuracy #ad - New designed digital movement for ultra smooth sliding and high shock protection. Lock screw for digital bezel and for holding the sliding jaw postion. Caliper measures 0 to 24. 0" 0 to 600mm with 00005" 001mm resolution and + or - 0002" accuracy, depth, for measuring inside and outside diameters, and step of items in harsh workshop conditions.

Lcd screen displays in inches and metric units. 0-12 inch dial caliper,. 001" graduation,. 1"/revolution. Measures 0 to 6" 0 to 150mm in 00005" 001mm increments for precision use.

More information about Mitutoyo 505-746 #ad


Similar products



Mitutoyo 293-345-30 Digimatic Micrometer, Range: 1"-2"/25.4-50.8 mm, IP65

#ad
#ad
Mitutoyo 293-345-30 #ad - Measures inside, depth, outside, and step values for versatility. Digital readout LCD shows inch or metric units for versatility when measuring. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Calibrated micrometer measures 1. 0" to 2. 0" 25. 4 to 508 mm with 000005" 0

001 mm resolution and + or - 000005" accuracy for taking outside diameter measurements in harsh workshop conditions. Includes a mitutoyo certificate of calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Caliper measures 0 to 24.

Mitutoyo 293-345-30 Digimatic Micrometer, Range: 1"-2"/25.4-50.8 mm, IP65 #ad - 0" 0 to 600mm with 00005" 001mm resolution and + or - 0002" accuracy, for measuring inside and outside diameters, depth, and step of items in harsh workshop conditions. Lcd screen displays in inches and metric units. Digital readout LCD shows inch or metric units for versatility when measuring. Measures 0 to 6" 0 to 150mm in 0

More information about Mitutoyo 293-345-30 #ad


Similar products



Mitutoyo 293-348-30 Digimatic Micrometer, IP65, 0-1"

#ad
#ad
Mitutoyo 293-348-30 #ad - Measures 0 to 6" 0 to 150mm in 00005" 001mm increments for precision use. Ratchet stop to help provide uniform pressure for precise, repeatable measurements. Measures inside, outside, depth, and step values for versatility. Lcd screen displays in metric units. Digital readout LCD shows inch or metric units for versatility when measuring.

Mitutoyo 293-348-30 Digimatic Micrometer, IP65, 0-1" #ad - Calibrated micrometer measures 1. 0" to 2. 0" 25. 4 to 508 mm with 000005" 0001 mm resolution and + or - 000005" accuracy for taking outside diameter measurements in harsh workshop conditions. 780mm body length for measuring large items. Ingress protection certified IP65 for protection against dust and water. New designed digital movement for ultra smooth sliding and high shock protection.

Measures 0 to 8" 0 to 200mm in 00005" 001mm increments for precision use. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Titanium nitride tin coating is applied to the sliding surface to increase wear resistance.

More information about Mitutoyo 293-348-30 #ad


Similar products



NOGA Dial Gage Holder Magnetic Base - Model: DG61003 AUTO Power: On/Off mag.Base Holding Power: 176 Ibs Regular Duty

#ad
#ad
NOGA DG61003 #ad - Absolute electrostatic capacitance-type linear encoder for accurate measurements. Jaws are constructed of stainless steel for durability. Anti-slip finish for improved grip while take measurements. It is an auxiliary tool for any general measurement and helps to increase precision and working efficiency. With thumb roller.

Measures 0 to 6" 0 to 150mm in 00005" 001mm increments for precision use. Lcd screen displays in metric units. Powerful 176 lbs. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. 780mm body length for measuring large items. Titanium nitride tin coating is applied to the sliding surface to increase wear resistance.

NOGA Dial Gage Holder Magnetic Base - Model: DG61003 AUTO Power: On/Off mag.Base Holding Power: 176 Ibs Regular Duty #ad - New designed digital movement for ultra smooth sliding and high shock protection. Digital readout LCD shows inch or metric units for versatility when measuring. Caliper measures 0 to 24. 0" 0 to 600mm with 00005" 001mm resolution and + or - 0

More information about NOGA DG61003 #ad


Similar products



Fowler Full 2 Year Warranty Xtra-Range Electronic Caliper, 54-100-024-1, 0-24" Measuring Range, 4" Jaw Depth, 0.0005" Resolution

#ad
#ad
Fred V. Fowler Company, Inc. 54-100-024-1 #ad - Anti-slip finish for improved grip while take measurements. Its long jaws permit accessibility when measuring large workpieces. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. A thumb-operated roller enables fine adjustments when measuring. Digital readout LCD shows inch or metric units for versatility when measuring.

Measures inside, outside, depth, and step values for versatility. Includes protective case and SR44 silver oxide battery. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. The hardened stainless steel frame offers corrosion resistance and long life.

Fowler Full 2 Year Warranty Xtra-Range Electronic Caliper, 54-100-024-1, 0-24" Measuring Range, 4" Jaw Depth, 0.0005" Resolution #ad - Ingress protection certified IP65 for protection against dust and water. Except 500-500-10, 500-501-10, 500-502-10 Includes protective case and SR44 silver oxide battery. Compared to dial calipers, and more error-free, digital calipers provide measurements that are faster, but they are more fragile mechanically and electronically, easier, and do not resist coolant well.

Top arm length: 3. 98". Lcd screen displays in metric units.

More information about Fred V. Fowler Company, Inc. 54-100-024-1 #ad


Similar products



HFS PRECISION MICROMETER HOLDER STAND BASE INSPECTION NEW

#ad
#ad
HFS 16440 #ad - Measures inside, outside, depth, and step values for versatility. Includes protective case and SR44 silver oxide battery. Titanium nitride tin coating is applied to the sliding surface to increase wear resistance. Calibrated micrometer measures 1. 0" to 2. 0" 25. 4 to 508 mm with 000005" 0001 mm resolution and + or - 0

HFS PRECISION MICROMETER HOLDER STAND BASE INSPECTION NEW #ad - 00005" accuracy for taking outside diameter measurements in harsh workshop conditions. Can be adjusted to any position. Extended measuring ranges of up to 24"/600mm, with 00005"/001mm resolution for inside dimension ID and outside dimension OD measurements. With thumb roller. Oil proof materials are used in all plastic components.

780mm body length for measuring large items. Made of cast iron. Digital, single-value readout LCD shows inch and metric units for versatility when measuring. Lock screw for digital bezel and for holding the sliding jaw postion. Measures 0 to 8" 0 to 200mm in 0

More information about HFS 16440 #ad


Similar products

Scroll to top