Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20″ x 2-1/2″, 5 Micron

#ad
#ad
Pentair Industries C1-20 #ad - The cartridge is made of cellulose media that has been impregnated with powdered activated carbon PAC, with a polyester backing and external polyethylene netting for strength. This pentek c1-20 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water.

This filter cartridge is for use in residential drinking water purification. Specifications nominal filtration rating 5 microns initial pressure drop at 5 gpm 1 psi Chlorine reduction capacity 5, 000 gallons at 2 gpm Operating temperature range 40 to 125 degrees F 4. 4 to 51. 7 degrees c maximum dimensions h x w 20 x 2-1/2 inches 508 x 64 mmThe nominal filtration rating is for a particle removal efficiency of 85%.

Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20" x 2-1/2", 5 Micron #ad - Initial pressure drop of 1 psi at a flow rate of 5 gpm. It has an initial pressure drop of 1 pound per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 75% in up to 5, 000 gallons at a flow rate of 2 gallons per minute gpm.

For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

More information about Pentair Industries C1-20 #ad

Hydronix SDC-25-2005/4 SDC-25-2005 4 pack sediment filters 2.5 x 20 2.5" x 20" white

#ad
#ad
Hydronix SDC-25-2005/4 #ad - This sediment filter is suitable for use in filtration systems such as ice machines, Wineries, beverage, film processing, coffee, analytical, and many others. Fits all 20" x 2. 5" multistage or single stage filtration system housings. Food grade for the Food and Beverage Industry. 4 pack of hydronix sdc-25-2005 polypropylene sediment filters have a particle retention Size of 5 micron and is used in a residential and commercial water filtration system applications.

Hydronix SDC-25-2005/4 SDC-25-2005 4 pack sediment filters 2.5 x 20 2.5" x 20" white #ad - Made of 100 percent pure polypropylene, the cartridge has structural stability, and is resistance to most chemicals. Oil and gas, metal finishing, fine chemicals, Pulp and Paper, Electronics, etc.20" x 2. 5" size. The coreless filter design has an outside diameter OD of 2. 5" and overall length of 20". 5 micron, 60-120 psi, nsf 42 certified.

Certified by the ansi/nsf american national standards Institute and National sanitation Foundation standard 42 for Material and structural Safety, and is FDA approved for the Material requirements only. 20" whole home sediment filters.

More information about Hydronix SDC-25-2005/4 #ad


Similar products



Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns

#ad
#ad
Pentair Industries EPM-20 #ad - It has a nominal 85% filtration rating of 10 microns. 20" x 2. 5" size. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

5 micron, 60-120 psi, nsf 42 certified. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. The cartridge has an initial pressure drop of 1. 0 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4.

4 to 82. 2 degrees C. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water. Specificationsnominal filtration rating10 micronsInitial pressure drop at 2 gpm1.

Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns #ad - 0 psichlorine reduction capacity6, 000 gallons at 2 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w20 x 2-7/8 inches 508 x 73 mmMaterials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Pentair Industries EPM-20 #ad


Similar products



Pentek PD-1-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 1 Microns

#ad
#ad
Pentair Industries PD-1-20 #ad - It has a nominal filtration rating of 1 micron at an efficiency of 85%. This pentek pd-1-20 polypropylene filter cartridge reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

Pentek PD-1-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 1 Microns #ad - SpecificationsNominal filtration rating1 micronInitial pressure drop at 5 gpm. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4.

4 to 79. 4 degrees C.

More information about Pentair Industries PD-1-20 #ad


Similar products



Tier1 Replacement for Pentek EP-20 5 Micron 20 x 2.5 Activate Carbon Block Water Filter

#ad
#ad
Tier1 #ad - 20" x 2. 5" size. Quick & easy installation: Fits most housings that accept standard 20-inch x 2. 5-inch water filter cartridges. Nominal filtration rating of 10 microns. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 1 micron.

Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Initial pressure drop of 1. 0 psi at a flow rate of 2 gpm. Fits all 20" x 2. 5" multistage or single stage filtration system housings. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. The ep-20 pentek comparable replacement filter Cartridge by Tier1 goes to work reducing chlorine taste and odor and sediment particles 5 micron or larger to significantly improve the quality of your water.

Tier1 Replacement for Pentek EP-20 5 Micron 20 x 2.5 Activate Carbon Block Water Filter #ad - 100% tier1 no worries guarantee: We stand behind the quality of filtration and overall performance of our Tier1 filters!5 micron, 60-120 psi, nsf 42 certified. 6 month filter life: by replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great. High quality filtration: this filter reduces chlorine taste & odor, dirt, silt, sand, rust and corrosion, sediment, and other particles.

More information about Tier1 #ad


Similar products



Hydronix HYDRONIX-SWC-25-2005 String Wound Filter 2.5" OD X 20" Length, 5 Micron

#ad
#ad
Hydronix HYDRONIX-SWC-25-2005 #ad - Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Nominal filtration rating of 10 microns. This filter is intended for commercial and residential applications only. Fits all 20" x 2. 5" multistage or single stage filtration system housings. 100% tier1 no worries guarantee: We stand behind the quality of filtration and overall performance of our Tier1 filters!

Hydronix HYDRONIX-SWC-25-2005 String Wound Filter 2.5" OD X 20" Length, 5 Micron #ad - 5 micron. String Wound Polypropylene. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Effective with both city and well water. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Food grade for the Food and Beverage Industry. Order today! 5 micron, 60-120 psi, nsf 42 certified.

20 inches length x 2 1/2 inches outside diameter. The hydronix swc-25-2005 is universally sized for any 20x2. 5 inch sized housings. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C.

More information about Hydronix HYDRONIX-SWC-25-2005 #ad


Similar products



Pentek S1-20 Pleated Cellulose Filter Cartridge, 20" x 2-5/8", 20 Micron

#ad
#ad
Pentair Industries S1-20 #ad - This pleated filter cartridge is for use in various applications, and industrial processes, irrigation, including drinking water purification, among others. Specifications nominal filtration rating 20 microns Initial pressure drop at 10 gpm 08 psi recommended flow rate 15 gpm Operating temperature range 40 to 145 degrees F 4.

4 to 62. 8 degrees c maximum dimensions h x w 20 x 2-5/8 inches 508 x 67 mmThe nominal filtration rating is for a particle removal efficiency of 85%. H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes. Food grade for the Food and Beverage Industry. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Pentek S1-20 Pleated Cellulose Filter Cartridge, 20" x 2-5/8", 20 Micron #ad - 100% tier1 no worries guarantee: We stand behind the quality of filtration and overall performance of our Tier1 filters!6 months. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. It has an initial pressure drop of 0

More information about Pentair Industries S1-20 #ad


Similar products



20" x 2.5" Sediment Water Filter 4 5 Micron Whole House Cartridges

#ad
#ad
Wholesale Market LLC #ad - Nominal filtration rating of 10 microns. Cellulose media pleated around a polypropylene core for strength. Quick & easy installation: Fits most housings that accept standard 20-inch x 2. 5-inch water filter cartridges. String Wound Polypropylene. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

20" x 2.5" Sediment Water Filter 4 5 Micron Whole House Cartridges #ad - This is for 4 sediment Filters 5 micron size 2. 5" x 20" that fit a standard 20 inch filter housing. 20" x 2. 5" size. 4 pack of sediment filters, size 2. 5" x 20" 5 micron that fit a standard 20 inch filter housing. High effeciency filters with great dirt holding capacity because of the graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron catching smaller particles.

Sediment filters are used to remove particles such as sand, dirt, silt, and rust. To remove these particles it allows a better performance for the following Carbon Block or GAC filters. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. 6 months.

More information about Wholesale Market LLC #ad


Similar products



Pentek EP-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 5 Microns

#ad
#ad
Pentair Industries EP-20 #ad - Bonded polypropylene microfiber for resistance to chemicals and bacteria. Nominal filtration rating of 10 microns. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. The filter will reduce free available chlorine fAC at 2 parts per million ppm by at least 90% in up to 12, 000 gallons at a flow rate of 2 gallons per minute gpm.

Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Water filters are used in a wide range of applications, including drinking water purification, industrial processes, and irrigation, swimming pools, among others.

Pentek EP-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 5 Microns #ad - Pentair manufactures industrial, commercial, and residential water filtration components and systems. Reduces sand, silt, rust, dirt, and scale particles in residential and commercial water. Nominal filtration rating of 20 microns. 20" x 2. 5" size. Food grade for the Food and Beverage Industry. Fits all 20" x 2.

5" multistage or single stage filtration system housings.

More information about Pentair Industries EP-20 #ad


Similar products



Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief

#ad
#ad
Pentair Industries 3/4" 3G Standard NPT #ad - They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. Nominal filtration rating of 10 microns. This filter housing is for use in various applications, food service, and humidifying systems, including residential drinking water filtration, among others.

Specifications filter cartridge size H x W sold separately 20 x 2-1/2 inches 254 x 63. 5 mm initial pressure drop at 10 gpm 1 psi Maximum temperature 125 degrees F 51. 7 degrees c maximum pressure 125 psi maximum dimensions h x w 23 x 5-3/8 inches 597 x 137 mm materials and structural integrity certification NSF/ANSI standard 42H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief #ad - Water filters remove undesirable particles, adsorption, chemicals, and microorganisms from water by means of a semipermeable barrier, or biological processes. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Reduces sand, silt, rust, dirt, and scale particles in residential and commercial water.

Nominal filtration rating of 20 microns. Temperature range of 40 to 175 degrees F 4. 4 to 79.

More information about Pentair Industries 3/4" 3G Standard NPT #ad


Similar products



20" x 2.5" CTO Carbon Block Water Filter 4 5 micron Whole House Cartridges

#ad
#ad
Wholesale Market LLC #ad - Cellulose media pleated around a polypropylene core for strength. Initial pressure drop of 1 psi at a flow rate of 10 gpm. Removes chlorine, bad taste, odor and organic solvents. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Also organic chemicals that contribute to bad taste and odor.

20" x 2.5" CTO Carbon Block Water Filter 4 5 micron Whole House Cartridges #ad - Food grade for the Food and Beverage Industry. Quick & easy installation: Fits most housings that accept standard 20-inch x 2. 5-inch water filter cartridges. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 1 micron. This is for 4 carbon block filters 5micron size 2.

5" x 20" that fit a standard standard 20 inch filter housing. All our filters individually wrapped for freshness and protection while in shipment. Carbon block filter. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. 4 pack of sediment filters, size 2.

More information about Wholesale Market LLC #ad


Similar products

Scroll to top