PSI Woodworking DBGULP Big Gulp Dust Hood

#ad
#ad
PSI Woodworking DBGULP #ad - It's lightweight and portable and has a tough ABS plastic construction. It's an ideal hood for miter saws, carving, sanding, radial arm saws, lathes, and planers without hoods. Weighs 2. 2 pounds. Perfect for miter saws, radial arm saws, lathes, sanding, carving, and planers without hoods. Lightweight and portable; made from tough ABS plastic.

PSI Woodworking DBGULP Big Gulp Dust Hood #ad - The 4-inch port to connects to any dust collection system. 4-inch port to connect to any dust collection system. Psi woodworking's big gulp dust hood has a large 13-by-16-inch opening. Dust hood with a 13-by-16-inch opening.

More information about PSI Woodworking DBGULP #ad

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer

#ad
#ad
Southern Technology LLC 70136 #ad - The powertec 4-inch to 2-1/2-inch cone reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose. Simple to install, use and uninstall for the utmost in ease, performance and reliability. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose.

Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters. Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors.

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer #ad - . Tough durable ABS plastic. The 2-1/2-inch opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID.

More information about Southern Technology LLC 70136 #ad


Similar products



Big Horn 11741PK 4-Inch Key Hose Clamp, 5-Pack, Colors may vary

#ad
#ad
Big Horn 11741PK #ad - No tools required. 5-pack. No tools required. For more information go to www. P65warnings. Ca. Gov. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. Our 4-inch stainless steel Key Hose Clamps hand tighten for a leak-proof seal, even in tight spaces. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

Big Horn 11741PK 4-Inch Key Hose Clamp, 5-Pack, Colors may vary #ad - Easy to tighten. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose.

Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors. Tough durable ABS plastic. Provides leak-proof seal.

More information about Big Horn 11741PK #ad


Similar products



POWERTEC 70108 4-Inch Blast Gate for Vacuum/Dust Collector

#ad
#ad
POWERTEC 70108 #ad - And 3-3/4-inch I. D. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. Powertec 4-inch blast gates optimizes the efficiency of your dust collection system by seamlessly directing the airflow from one machine to another. Provides leak-proof seal.

Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors. And 3-3/4-inch I. D. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters.

POWERTEC 70108 4-Inch Blast Gate for Vacuum/Dust Collector #ad - 4-inch outlet diameter. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose. Maximizes the efficiency of dust collection system by directing the air flow from one machine to another. Tough, durable ABS material. No tools required. Effective, hassle-free, and simple to use - this essential dust collection accessory comes in handy every time! 4-Inch nominal end measures 3-61/64-Inch O.

D. Save time and hassle with the handy sliding gate; just glide the gate through the case for a thorough cleaning.

More information about POWERTEC 70108 #ad


Similar products



POWERTEC 70143 Heavy Duty 4-Inch x 20-Foot PVC Flexible Dust Collection Hose, Clear Color

#ad
#ad
Southern Technology LLC 70143 #ad - 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. Temperature resistant up to 176F. Easy sliding gate action saves your effort and time. The powertec flexible pvc hoses are heavy duty, super flexible, chemical resistant and abrasive and tear proof! Temperature resistant up to 176F.

Maximizes the efficiency of dust collection system by directing the air flow from one machine to another. Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters.

POWERTEC 70143 Heavy Duty 4-Inch x 20-Foot PVC Flexible Dust Collection Hose, Clear Color #ad - No tools required. Easy to tighten. And 3-3/4-inch I. D. Made of high grade PVC with reinforced spring steel in the wall for greater durability. This super strong hose will not collapse under pressure from your dust collector and is ideal for sawdust, powder and ventilation. Flexible construction allows you to position the hose exactly where you want and clear material allows you to see inside the hose! Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose.

Tough durable ABS plastic.

More information about Southern Technology LLC 70143 #ad


Similar products



POWERTEC 70190 Y-Fitting, 4 x 2-1/2"

#ad
#ad
POWERTEC 70190 #ad - Tough, durable ABS plastic material. Flame retardant according to UL94-HB. And 2-5/16-inch I. D. Use this sturdy, tight-fitting connector to facilitate a dual hose branch connection from a single main hose line. 4-inch x 20 foot long, clear color. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose.

POWERTEC 70190 Y-Fitting, 4 x 2-1/2" #ad - No tools required. Tough durable ABS plastic. Easy to tighten. And 3-45/64-inch I. D. 2-1/2-inch nominal end measures 2-15/32-Inch O. D. 4-inch nominal end measures 3-61/64-Inch O. D. Provides a multitude of applications. Allows your dust collection system the capacity to service multiple machines. Maximizes the efficiency of dust collection system by directing the air flow from one machine to another.

2-1/2-inch nominal end measures 2-15/32-Inch O. D. Two 4-inch nominal ends measure 3-15/16-Inch O.

More information about POWERTEC 70190 #ad


Similar products



POWERTEC 70123 O.D. Splice, 4"

#ad
#ad
Southern Technology LLC 70123 #ad - Flame retardant according to UL94-HB. Two 4-inch nominal ends measure 3-15/16-Inch O. D. Easy sliding gate action saves your effort and time. No tools required. Splice, 4-inch, is designed to connect two 4-inch hoses together. And 3-11/16-inch I. D. A middle section with greater diameter for easy assembly. Maximizes the efficiency of dust collection system by directing the air flow from one machine to another.

Easy to tighten. Temperature resistant up to 176F. Tough, durable ABS plastic material. Tough durable ABS plastic. Provides leak-proof seal. Tough, durable ABS plastic material. Fast and easy to install, these handy accessories maximize the efficiency and effectiveness of your dust collection assembly. Accepts most 4-Inch dust collection hose.

POWERTEC 70123 O.D. Splice, 4" #ad - And 2-5/16-inch I. D. Designed for connecting to two 4-Inch diameter hoses together. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters.

More information about Southern Technology LLC 70123 #ad


Similar products



POWERTEC 70127 2.5-Inch Key Hose Clamp, 5-Pack

#ad
#ad
POWERTEC 70127 #ad - Provides a multitude of applications. Accepts most 4-Inch dust collection hose. Two 4-inch nominal ends measure 3-15/16-Inch O. D. Stainless Steel. 4-inch outlet diameter. Tough, durable ABS plastic material. Each o. D. Tough, durable ABS plastic material. Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors.

POWERTEC 70127 2.5-Inch Key Hose Clamp, 5-Pack #ad - Easy to tighten. And 3-45/64-inch I. D. 2-1/2-inch nominal end measures 2-15/32-Inch O. D. Easy sliding gate action saves your effort and time. These convenient accessories require no tools, and are quick and easy to install and uninstall. No tools required. And 2-5/16-inch I. D. Designed for connecting to two 4-Inch diameter hoses together.

Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose. Provides leak-proof seal. Allow for tool-less adjustments.

More information about POWERTEC 70127 #ad


Similar products



POWERTEC 70151 Dust Hood Rectangular Funneled Shape, 4-Inch By 10-Inch

#ad
#ad
Southern Technology LLC 70151 #ad - Easy sliding gate action saves your effort and time. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters. Tough, durable ABS material.

Both 4-inch nominal ends measure 3-31/32-Inch O. D. And 3-11/16-inch I. D. Use with dust collection; 5 pieces per pack. Clamping range: 2-Inch to 2-3/4-Inch. Provides a multitude of applications. Accepts most 4-Inch dust collection hose. Rectangular hood is 10-Inches across. Simple and quick to install. 4-inch x 20 foot long, clear color.

POWERTEC 70151 Dust Hood Rectangular Funneled Shape, 4-Inch By 10-Inch #ad - Can be placed in multiple positions. Two 4-inch nominal ends measure 3-15/16-Inch O. D. Create a cleaner, healthier shop environment with this essential component.

More information about Southern Technology LLC 70151 #ad


Similar products



MADE IN USA! - 4" x 10' Ultra-Flex Clear Vue PVC Hose

#ad
#ad
Fulton 6168 #ad - Ideal for sawdust collection. Both 4-inch nominal ends measure 3-31/32-Inch O. D. And 2-5/16-inch I. D. Designed for connecting to two 4-Inch diameter hoses together. Clamping range: 2-Inch to 2-3/4-Inch. A middle section with greater diameter for easy assembly. Tough, durable ABS material. And 3-11/16-inch I. D. Use with dust collection; 5 pieces per pack.

MADE IN USA! - 4" x 10' Ultra-Flex Clear Vue PVC Hose #ad - Tough durable ABS plastic. Perfect solution when a smaller rectangular dust hood is needed. Accepts most 4-Inch dust collection hose. Ideal for sawdust, powder and ventilation. Super flexible hose for maneuvering around all your shop machinery. Rectangular hood is 10-Inches across. Available in two different diameters 2-1/2" and 4" and three different lengths for each diameter 10', 20' and 50' all sold separately.

. Each o. D. Temperature resistant up to 176F. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters.

More information about Fulton 6168 #ad


Similar products



POWERTEC 70169 Mini Gulp Dust Hood with 4" Port, 13-1/2" x 7-1/4"

#ad
#ad
POWERTEC 70169 #ad - The powertec mini gulp dust hood is the perfect solution for catching dust, chips and debris from your machines. A middle section with greater diameter for easy assembly. No tools required. Tough, durable ABS material. 4-inch outlet diameter. Flange is 7/8" wide. Tough durable ABS plastic. Can be placed behind, underneath or wherever is convenient.

4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. 4-inch nominal end measures 3-61/64-Inch O. D. Mounting flange has pre-drilled holes for you to use when attaching your device. Tough, durable ABS plastic material. Maximizes the efficiency of dust collection system by directing the air flow from one machine to another.

POWERTEC 70169 Mini Gulp Dust Hood with 4" Port, 13-1/2" x 7-1/4" #ad - Can be placed in multiple positions. It can be used on your chop saw, table saw, lathe, drill press and other machines. And 3-45/64-inch I. D. 2-1/2-inch nominal end measures 2-15/32-Inch O. D.

More information about POWERTEC 70169 #ad


Similar products

Scroll to top