The Hillman Group 2228 Number-10 Stainless Steel Flat Washer 50-Pack

#ad
#ad
The Hillman Group 2228 #ad - The called out size is the inner diameter of the washer. Flat washers are commonly used in decks and fence building. The flat washer provides a greater bearing surface which helps prevent a nut or bolt head from tearing through the material. Flat washers are ideal for increasing the load bearing surface under a fastener's head by distributing the load through the washer.

The Hillman Group 2228 Number-10 Stainless Steel Flat Washer 50-Pack #ad - Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. These washers help to prevent bolts or nuts from pulling through a surface. Used in applications with nuts and bolts.

More information about The Hillman Group 2228 #ad

10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

#ad
#ad
Fastenere #ad - Authorities disagree on whether nyloc nuts should be reused. For example, and plumbing handbook notes that the nylon insert is not damaged by installation and therefore they can be reused many times, Bolts, Fasteners, Carroll Smith Carroll Smith's Nuts, and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification.

The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere #ad - The plastic insert is placed at the end of the nut, and its inner diameter ID is slightly smaller than the major diameter of the screw. It is a nut with a nylon collar insert that resists turning. For use with an externally threaded item that measures 0190 inch and has 32 threads per inch. Width measured From Flat to Flat 3/8".

Hex socket Drive 3/8". A nyloc nut, also referred to as a nylon-insert lock nut, or elastic stop nut, polymer-insert lock nut, is a kind of locknut.

More information about Fastenere #ad


Similar products



The Hillman Group 2236 Number-10 Stainless Steel Split Lock Washer 50-Pack

#ad
#ad
The Hillman Group 2236 #ad - Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. The split lock washer provides a more uniform load distribution.

Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. Hex socket Drive 3/8". For use with an externally threaded item that measures 0190 inch and has 32 threads per inch. Width measured From Flat to Flat 3/8". Lock washers are commonly used in any application using a bolt where two pieces are being drawn together.

The Hillman Group 2236 Number-10 Stainless Steel Split Lock Washer 50-Pack #ad - This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. Used in applications with like nuts and bolts of similar diameter as well as screw products. It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern.

Height 15/64".

More information about The Hillman Group 2236 #ad


Similar products



10-24 x 3/4" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 By Fastenere

#ad
#ad
Lightning Stainless #ad - The material may be slightly magnetic. Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

The split lock washer provides a more uniform load distribution. These screws are available with a variety of head shapes, and drive styles, which determine how the screw interacts with the mating surface, which determine the type of tool required to install the screw. Height 15/64". The button head is round with a low profile and short vertical sides, and is suitable for light duty applications.

10-24 x 3/4" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 By Fastenere #ad - 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Hex socket Drive 3/8". Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. Thread diameter 0190". Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance.

Head height 0101".

More information about Lightning Stainless #ad


Similar products



The Hillman Group 2990 10-24-Inch Stop Nut, 15-Pack

#ad
#ad
The Hillman Group 2990 #ad - Height 15/64". Head height 0101". Stop nuts are used for fastening to a bolt when mechanically joining materials together. The purpose of the nylon insert is to prevent backing off or loosening from vibration. Nylon insert Lock Nuts are also known as stop nuts. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. Helps resist the effects of vibration and other forces. Hex socket Drive 3/8". Allen hex drive Size 1/8". The bolt threads into the nylon material are located at the top of the nut.

The Hillman Group 2990 10-24-Inch Stop Nut, 15-Pack #ad - For use with an externally threaded item that measures 0190 inch and has 32 threads per inch. Width measured From Flat to Flat 3/8". Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.

Thread diameter 0

More information about The Hillman Group 2990 #ad


Similar products



The Hillman Group 44002 10-32 x 1-Inch Button Socket Cap Screw, Stainless Steel, 15-Pack

#ad
#ad
The Hillman Group 44002 #ad - Used in applications with like nuts and bolts of similar diameter as well as screw products. A button head socket cap screw is a screw with a button head and hexagon drive for tightneing with an Allen-style wrench. For use with an externally threaded item that measures 0190 inch and has 32 threads per inch.

Width measured From Flat to Flat 3/8". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

The Hillman Group 44002 10-32 x 1-Inch Button Socket Cap Screw, Stainless Steel, 15-Pack #ad - The split lock washer provides a more uniform load distribution. Allen hex drive Size 1/8". Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. Thread diameter 0190". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. This screw carries a recessed internal socket drive to add strength. Height 15/64".

More information about The Hillman Group 44002 #ad


Similar products



25 Rubber Well Nuts #10-32 .807 Length 3/8" Hole Clipsandfasteners Inc

#ad
#ad
Clipsandfasteners Inc #ad - Height 15/64". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. The split lock washer provides a more uniform load distribution.

Head height 0101". Helps resist the effects of vibration and other forces. Thread: #10-32Head Diameter:. 750"overall Length:. 807"shank Length:. 620"shank Diameter:. 375"head Thickness:. 187"hole size: 3/8"Grip Range:. 030-. 227"25 per package for use with an externally threaded item that measures 0190 inch and has 32 threads per inch.

25 Rubber Well Nuts #10-32 .807 Length 3/8" Hole Clipsandfasteners Inc #ad - Width measured From Flat to Flat 3/8". Ideal for use in confined areas where the head needs to be flush or below the surface. Hex socket Drive 3/8".

More information about Clipsandfasteners Inc #ad


Similar products



10-24 x 1" Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Machine Thread, Quantity 50 Pieces By Fastenere

#ad
#ad
Lightning Stainless #ad - Machine screws have machine threads for use with a nut or in a tapped hole. Head height 0101". Head diameter 0373". Head height 0133". For mechanical applications. Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

10-24 x 1" Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Machine Thread, Quantity 50 Pieces By Fastenere #ad - The split lock washer provides a more uniform load distribution. Thread diameter 0190". Helps resist the effects of vibration and other forces. Ideal for use in confined areas where the head needs to be flush or below the surface. For use with an externally threaded item that measures 0190 inch and has 32 threads per inch.

Width measured From Flat to Flat 3/8". Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. Thread diameter 0190".

More information about Lightning Stainless #ad


Similar products



The Hillman Group 44132 10-24 x 4-Inch Oval Head Phillips Machine Screw, Stainless Steel, 15-Pack

#ad
#ad
The Hillman Group 44132 #ad - Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. Thread diameter 0190". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

The Hillman Group 44132 10-24 x 4-Inch Oval Head Phillips Machine Screw, Stainless Steel, 15-Pack #ad - The split lock washer provides a more uniform load distribution. Head diameter 0373". Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening.

Stainless Steel. Ideal for use in confined areas where the head needs to be flush or below the surface. Hex socket Drive 3/8". Stainless steels are used for their corrosion resistance, scaling resistance, high-temperature strength, and low-temperature toughness. High-torque capability.

More information about The Hillman Group 44132 #ad


Similar products



The Hillman Group 2529 10-24-Inch Stainless Steel Hex Nut, 50-Pack

#ad
#ad
The Hillman Group 2529 #ad - 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. The called out size is the inner diameter and the number of threads per inch or thread pitch.

The Hillman Group 2529 10-24-Inch Stainless Steel Hex Nut, 50-Pack #ad - Allen hex drive Size 1/8". For mechanical applications. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. High-torque capability. Ideal for use in confined areas where the head needs to be flush or below the surface. Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

The split lock washer provides a more uniform load distribution. Phillips Drive Size #2. Helps resist the effects of vibration and other forces. Can be used with any fastener with a machine screw thread. For use with an externally threaded item that measures 0

More information about The Hillman Group 2529 #ad


Similar products



#10-24 Inch Lock Nut 100 Pack Stainless Steel Finish Hex, 304 18-8 Stainless Steel with Nylon Insert, by Bolt Dropper

#ad
#ad
Bolt Dropper #ad - Thread diameter 0190". Hex socket Drive 3/8". Value:get the most out of your purchase! We offer different size packages so you won't have to worry about running out of Hex Lock Nuts in the middle of your project. Head height 0133". Will not come loose: With a nylon insert, these lock nuts greatly reduce loosening under vibrations and torque.

Great to keep around: bolt dropper hex nuts are great to have around for use in wood and wet environments. Helps resist the effects of vibration and other forces. Bolt dropper hex lock nuts are perfect for use near salt water, fresh water and other related projects. Top quality hex lock nuts: rated for both indoor and outdoor use Superior corrosion resistance to regular steel, made with 100% Stainless Steel.

#10-24 Inch Lock Nut 100 Pack Stainless Steel Finish Hex, 304 18-8 Stainless Steel with Nylon Insert, by Bolt Dropper #ad - Ideal for use in confined areas where the head needs to be flush or below the surface. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Thread diameter 0190". Head diameter 0361". Can be used with any fastener with a machine screw thread.

More information about Bolt Dropper #ad


Similar products

Scroll to top