Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots

#ad
#ad
Traxxas TRA5451R #ad - These are simply the most advanced steel CV driveshafts available. T-maxx models #4902, 4909, 4908, Revo 3.3 models #5308, 5309, e-revo model #5605 and E-Maxx model #3905 only. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts.

The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. This product is made from high quality materials and designed for long-lasting performance. The inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin.

Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots #ad - Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.

Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks. Traxxas steel constant velocity Driveshafts are designed to handle the extreme horsepower and articulation that a T-Maxx or Revo can dish out.

More information about Traxxas TRA5451R #ad

Traxxas 5650R Steel Constant-Velocity Center Driveshafts

#ad
#ad
Traxxas TRA5650R #ad - The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. Complete kit includes front and rear driveshafts, ready to install. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance.

Complete kit includes front and rear driveshafts, ready to install. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. The inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin.

Traxxas 5650R Steel Constant-Velocity Center Driveshafts #ad - Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out.

Traxxas steel constant velocity driveshafts are designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out. These are simply the most advanced steel CV driveshafts available. U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin.

More information about Traxxas TRA5650R #ad


Similar products



Traxxas 5151R Steel Constant-Velocity Center Driveshafts

#ad
#ad
Traxxas TRA5151R #ad - Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. The inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin.

The nickel plated steel shafts, and red-anodized aluminum accents not only look good, blue silicone boots, they are designed to exacting specifications for ultimate strength and performance. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

Traxxas 5151R Steel Constant-Velocity Center Driveshafts #ad - U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. These are simply the most advanced steel CV driveshafts available. Complete kit includes front and rear driveshafts, ready to install. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

More information about Traxxas TRA5151R #ad


Similar products



Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo

#ad
#ad
Traxxas 5632 #ad - Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. Complete kit includes front and rear driveshafts, ready to install. Mounting screws are included. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. This product is made from high quality materials and designed for long-lasting performance. Includes mounting screws. Strengthen your e-revo or Summit with this brilliant blue-anodized chassis brace to conquer massive jumps.

Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo #ad - Installs in minutes. Fits 1/10 scale E-Revo and Summit. What's in the box chassis brace; mounting screws 3 Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

Brilliant blue-anodized aluminum. Strengthens rear chassis for massive jumps. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

More information about Traxxas 5632 #ad


Similar products



Traxxas 5318X Red-Anodized Aluminum Pushrod pair

#ad
#ad
Traxxas TRA5318X #ad - U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Strengthens rear chassis for massive jumps. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Brilliant blue-anodized aluminum. Rod ends included. Use with long travel or #5357 progressive-1 rockers. Rod ends are already installed making it simple to just bolt them on the truck. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance.

Traxxas 5318X Red-Anodized Aluminum Pushrod pair #ad - Includes mounting screws. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. These spacers are included with the progressive-2 rockers. Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out.

Strong, 7075-t6 aluminum versions of each are available to decrease the total weight of the truck by 31 grams.

More information about Traxxas TRA5318X #ad


Similar products



Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit

#ad
#ad
Traxxas TRA5352R #ad - Rod ends included. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Fits 1/10 scale E-Revo and Summit. This is the 5352r h/d rebuild Kit Revo/Maxx Trucks from Traxxas.

U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Traxxas, truly the fastest name in Radio Control. Complete kit includes front and rear driveshafts, ready to install. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods.

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit #ad - . 102mm Length. Includes steel disc/ aluminum friction pads 3/ spring, revo 1/ spring, Maxx 1/ 2x9. 8mm pin/ 5x8mm MW/ 5. 0mm nl 1/ 4. 0mm nl 1. Rod ends are already installed making it simple to just bolt them on the truck. This is for use on rc vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings.

Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out.

More information about Traxxas TRA5352R #ad


Similar products



Traxxas 5472 Wheelie Bar

#ad
#ad
Traxxas TRA5472 #ad - Complete kit includes front and rear driveshafts, ready to install. This product is made from high quality materials and designed for long-lasting performance. Rod ends are already installed making it simple to just bolt them on the truck. The wheelie bar mount is compatible with all factory Revo configurations, including sway bars and wing mounts.

. The accessory revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Traxxas 5472 Wheelie Bar #ad - Fits 1/10 scale E-Revo and Summit. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. Brilliant blue-anodized aluminum. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance.

Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents.

More information about Traxxas TRA5472 #ad


Similar products



Traxxas 5378X Pivot Ball Caps and Dust Boots set of four

#ad
#ad
Traxxas TRA5378X #ad - Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Includes mounting screws. This is for use on rc vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings.

Traxxas 5378X Pivot Ball Caps and Dust Boots set of four #ad - 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. This product is made from high quality materials and designed for lasting performance. Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. Includes dust boots, rubber 4/ dust boot retainers, rubber 4/ dust plugs, black 4, blue 4.

2 packages required to complete truck. Replaces worn or damaged parts. Includes steel disc/ aluminum friction pads 3/ spring, revo 1/ spring, Maxx 1/ 2x9. 8mm pin/ 5x8mm MW/ 5. 0mm nl 1/ 4. 0mm nl 1. 102mm Length. Heavy-duty slipper clutch rebuild kit.

More information about Traxxas TRA5378X #ad


Similar products



Traxxas 5353X Blue-Anodized Aluminum 17mm Wheel Hubs/Nuts set of four

#ad
#ad
Traxxas TRA5353X #ad - This product is made from high quality materials and designed for lasting performance. Ground-breaking design also accepts traditional aftermarket 17mm hex hubs. U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Quick and easy removal for off-road adventures.

Heavy-duty slipper clutch rebuild kit. Steel constant-velocity Center Driveshafts are designed to handle extreme horsepower and articulation. This is for use on RC vehicles, consult your user's manual for exact parts listings. Fits 1/10 scale E-Revo and Summit. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

Traxxas 5353X Blue-Anodized Aluminum 17mm Wheel Hubs/Nuts set of four #ad - Includes mounting screws. Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Fits all 1/10 Revos, nitro or electric. Use with long travel or #5357 progressive-1 rockers. Splined design interlocks with Traxxas 17mm splined wheels for precision alignment and unsurpassed torque handling.

More information about Traxxas TRA5353X #ad


Similar products



Traxxas 5379X Differential Ring Gear and Pinion, Revo 3.3

#ad
#ad
Traxxas TRA5379X #ad - Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Replaces worn or damaged parts. Rod ends included. Use with long travel or #5357 progressive-1 rockers. Replaces worn or damaged parts. Anodized red 7075-T6 aluminum. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running.

This is for use on RC vehicles, consult your user's manual for exact parts listings. Brilliant blue-anodized aluminum. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance.

Traxxas 5379X Differential Ring Gear and Pinion, Revo 3.3 #ad - This product is made from high quality materials and designed for lasting performance. No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents.

7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Includes 4 wheel hubs, 4 wheel nuts, and 4 screw pins with threadlock. This is the 5379x diff Ring Gear/Pinion Gear Revo 3.

More information about Traxxas TRA5379X #ad


Similar products



Traxxas 5480X Splined Wheel Wrench, 17mm

#ad
#ad
Traxxas 5480X #ad - The springs use high-quality spring steel with durable powder-coated finishes. Splined design interlocks with Traxxas 17mm splined wheels for precision alignment and unsurpassed torque handling. Anodized red 7075-T6 aluminum. Includes steel disc/ aluminum friction pads 3/ spring, revo 1/ spring, Maxx 1/ 2x9.

8mm pin/ 5x8mm MW/ 5. 0mm nl 1/ 4. 0mm nl 1. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Replaces worn or damaged parts. Replaces worn or damaged parts. Designed to fit larger 1/10 scale Traxxas vehicles: E-Maxx, E-Revo, Summit.

Traxxas 5480X Splined Wheel Wrench, 17mm #ad - Rod ends included. This product is made from high quality materials and designed for lasting performance. Heavy-duty slipper clutch rebuild kit. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents. Brilliant blue-anodized aluminum. Quick and easy removal for off-road adventures.

More information about Traxxas 5480X #ad


Similar products

Scroll to top